PoE Surge Protector SPD DT-CAT6-DIN is a single-port industrial PoE surge protector designed for exterior complex backhaul and networking applications with an IP10 rated Zinc alloy shell.
It supports 8 lines network signals and 10/100/1000 Mbps of data rates.
Ideal for 120W (max) PoE wires.
Either port can be PoE in or PoE out.
DT-CAT6-DIN equipped standard DIN rail mounting bracket, which can easily jam into the guide rail.
The DIN rail as a ground wire to transmit the current to the earth.
PoE Surge Protector SPD DT-CAT6-DIN is designed for channel-level protection of Cat.6 lines (Class E), ideal for retrofitting scenarios.
It supports PoE++/4PPoE compliance with IEEE 802.3 standards and is suitable for Gigabit Ethernet (up to 10 Gbps) and PoE-powered devices like IP cameras and wireless access points.
Nominal voltage Un: 48V
Max. Continuous Operating Voltage (d.c.) Uc: 60V
Type 2 / Class II / Class C
D1 Lightning Impulse Current (10/350 μs) per line Iimp: 0.5kA
C2 Nominal Discharge Current (8/20 μs) line-line In: 150A
C2 Nominal Discharge Current (8/20 μs) line-PG In: : 2.5kA
C2 Total Nominal Discharge Current (8/20 μs) In: : 10kA
C2 Nominal Discharge Current (8/20 μs) pair-pair (PoE) In: : 150A
PoE surge protector SPD DT-CAT6-DIN compliants with Lightning Protection Zone (LPZ) 0-2 and higher boundary deployment requirements, it features RJ45 connectors, a separate grounding cable, and NS 35 DIN rail compatibility, delivering robust protection against lightning, RFI, ESD, and transient surges.
The PoE surge protector SPD DT-CAT6-DIN is designed to protect sensitive data-processing equipment connected to a PoE network from transient overvoltages. Get PoE SPD price now!
LSP’s reliable surge protection devices (SPDs) are designed to meet the protection needs of installations against lightning and surges. Contact our Experts!
Copyright © 2010-2025 Wenzhou Arrester Electric Co., Ltd. All Rights Reserved. Privacy Policy
